Makita RJ01W Technical Reference - Page 3

] DISASSEMBLY/ASSEMBLY, 3] -1. Slider cont., epair - model

Get Makita RJ01W PDF manuals and user guides View all Makita RJ01W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Repair [3] DISASSEMBLY/ASSEMBLY [3] -1. Slider (cont.) DISASSEMBLING Fig. 2 1. Remove Set plate before removing 3x16 Tapping screws (8pcs). small slotted screwdriver Housing (R) P 3/ 12 2. Remove Housing (R) by unscrewing 3x16 Tapping screws (8pcs). Housing (R) Set plate Housing (L) Fig. 3 3. Remove Gear housing section from Housing (L). Model JR100D 4. Remove Shoe from Gear housing by unscrewing M4x10 Countersunk head screws from the both side of Gear housing. Model JR102D Gear housing Shoe Gear housing Shoe Fig. 4 5. Remove M3x12 Hex socket head bolts (2pcs). Now, Blade holder section is removed from Slider. M3x12 Hex socket head bolt Model JR100D Blade holder section. 5a. Remove Clamper, Pin 3 and M6x10 Hex socket set screw. So, Blade clamp is removed from Slider. Model JR102D Clamper M6x10 Hex socket set screw Pin 3 Blade clamp

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Slider (cont.)
Housing (R)
Housing (R)
Housing (L)
Set plate
small slotted screwdriver
2. Remove Housing (R) by unscrewing 3x16 Tapping screws
(8pcs).
1. Remove Set plate before removing
3x16 Tapping screws (8pcs).
Fig. 3
Fig. 2
Fig. 4
3. Remove Gear housing section from Housing (L).
4. Remove Shoe from Gear housing by unscrewing
M4x10 Countersunk head screws from the both side
of Gear housing.
Shoe
Model JR102D
Model JR102D
Model JR100D
Model JR100D
Shoe
Gear housing
Gear housing
5a. Remove Clamper, Pin 3 and M6x10 Hex socket set screw. So, Blade clamp is removed from Slider.
5. Remove M3x12 Hex socket head bolts (2pcs). Now, Blade holder section is removed from Slider.
Clamper
Blade clamp
M3x12 Hex socket head bolt
Blade holder section.
Pin 3
M6x10 Hex socket set screw
DISASSEMBLING
R
epair
P
3
/ 1
2