Marantz DV9600 DV9600 User Manual - Page 32
DVD Setup Menu - hp
View all Marantz DV9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6 DVD Setup Menu Using the FL menu The FL menu has been designed to set "HP PROLOGIC" and "REMOT CODE". It is recommended to set the FL menu before loading a DVD. If a DVD has been loaded, be sure to press 7 (STOP) twice before proceeding. (If "RESUME" is displayed in the FL display, press 7 (STOP).) Selecting the FL menu Press SET UP for longer than 2 sec. The FL OFF indicator on the player turns on and off. FL menu is displayed in the FL display. FL OFF FL menu Use the cursor buttons (5/∞) to select the FL menu you want as follows. (Example) HP PROLOGIC STOP REMOT CODE MENU SET UP To exit the FL menu When you have compleated setting up the FL menu or if you want to exit the FL menu, press SET UP to close the FL menu. HP PROLOGIC setting Select HP PROLOGIC, then press ENTER. Use the cursor buttons (5/∞) to select ON or OFF as follows. (Example) PL2 ON * PL2 OFF * Factory setting Press ENTER you want to set. The menu selection is set. Note • This function only affects the headphone output. • When set to PL2 ON, 2-channel source material is converted to the 5.1 channel format allowing you to enjoy a more expansive headphone listening experience. (page 13) REMOT CODE setting Select REMOT CODE, then press ENTER. Use the cursor buttons (5/∞) down to select the type of REMOT CODE you want to set as follows. (Example) DVD 1 * DVD 2 * Factory setting Press ENTER you want to set. The menu select is set. • The DVD player support two remote control codes: DVD 1 and DVD 2. • Set the remote control code of the Remote Control to the same setting. • See page 15 for more information. 32