Marantz DV9600 DV9600 User Manual - Page 57

English DVD Setup Menu 6 About i.LINK By simply connecting a single i.LINK cable between components with i.LINK ports, you can get direct digital transfers of not only DVD-Video audio but also multi-channel audio such as Super Audio CD or DVD-Audio, which previously could only be connected in analog with five audio cords, as well as 2channel audio like conventional CDs. When transferring DVD-Audio or Super Audio CD audio digitally by i.LINK, this unit employs the Jitter Free Transfer System (JFTS), a technology that removes jitter from transfers. By combining this unit with JFTS-compatible components, you can play jitter-free audio. Make sure that the plug is pushed fully home. To the i.LINK input i.LINK cable (Put on the market) Video cable (Put on the market) VIDEO IN To the Vieo input AV amplifier, etc. Note • The i.LINK audio interface does not transport video signals. A separate connection is necessary for video signals. • i.LINK cable specifications: S400 or better; 3.5 meters or shorter; 4-pin connectors • 96 kHz audio from copyright-protected DVD-Video discs is converted to 48 kHz before being output from the i.LINK port. • Set Audio Output under Audio Setup 1 to 5.1 Channel when outputting multi-channel audio from DVD-Audio discs (see page 39). • The play control of this unit and the input selector of an i.LINK-connected AV amplifier can be linked together (Auto Play) (see page 56). • When the i.LINK indicator (i.LINK) on the unit's display is lit, audio is not output from the digital audio output plugs, the analog audio output jacks, the HDMI jack, or the headphone jack. If you wish to output audio from the digital audio output plugs, the analog audio output jacks, the HDMI jack, or the headphone jack, set Audio Out from i.LINK Setup to Off (see page 55). • The i.LINK indicator (i.LINK) on the unit's display only lights when the connected amplifier is powered and its input selector is set to i.LINK. 57