McAfee IIP-S14C-NA-100I Product Guide - Page 11
Front Panel LEDs on the I-1400, Management Port Speed
View all McAfee IIP-S14C-NA-100I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
McAfee® IntruShield® IPS 4.1 IntruShield Sensor 1400 Product Guide An introduction to IntruShield sensors The IntruShield 1400 Sensor 8 Built-in internal tap (not shown). The internal tap (used with the 10/100 ports) provide stealth mode monitoring functionality and forgo the need of an external tap or connection to a SPAN port or hub. When the 10/100 ports are configured to monitor a network segment in peer mode, their internal tap allows a network segment to be connected directly to the sensor: one port receives/transmits from Device A (For example, a firewall, router, switch) and the other receives/transmits from Device B. You can also change 'on the fly' from internal tap mode to in-line mode. Note: Internal taps fail open, meaning that should the sensor fail physically while running in internal tap mode, the connection is not disrupted; your network traffic will continue to flow unimpeded (although there may be a minor disruption as the network devices surrounding the sensor establish direct connectivity). If you want to have fail-closed functionality, you can accomplish this via cabling. Normal Cat 5/Cat 5e cabling will fail open. Special cabling using the supplied failclosed dongles provides fail-closed functionality. For more information, see the section, Cabling the Monitoring ports (on page 15). Front Panel LEDs on the I-1400 The front panel LEDs provide status information for the health of the sensor and the activity on its ports. The following table describes the I-1400 front panel LEDs. LED Power Up Boot Status Green Off Green Off Amber Off Management Port Speed Management Port Link Fan Amber Off Green Off Green Amber Description The sensor is powered on and functioning. The sensor is powered off. The sensor is up and initialized. The sensor is powered off or is rebooting. The sensor is in the process of booting up. The sensor is powered off or the sensor is working fine after bootup initialization. The port speed is 100 Mbps The port speed is 10 Mbps The link is connected. The link is disconnected. Fans operating. One or more of the fans has failed. 3