McAfee IIP-S14C-NA-100I Product Guide - Page 14

McAfee® IntruShield® IPS 4.1 IntruShield Sensor 1400 Product Guide Before you install Sensor capacity for I-1400 sensor Sensor Specifications Description Relative Humidity (Non- Operating condensing) 10%-90% non-condensing Non-operating 5% to 95% non-condensing System Heat Dissipation 341 BTU/hr Airflow Altitude Throughput 200 lfm (1 m/s) Sea level to 10,000 ft (3050 m) 200 Mbps Cabling Specifications: Note the following cabling specifications for the sensor: • Category 5 Enhanced (Cat 5e) cable is required for transmission speeds up to 1 Gigabit per second (Gigabit Ethernet). • For Ethernet networks running at 10 or 100 Mbps, Category 5 (Cat 5) OR Cat 5e cable can be used. Note: Throughout this guide, cabling specifications will be mentioned as Cat5/Cat5e. Sensor capacity for I-1400 sensor The following table lists the sensor limitations by category: Maximum Type I-1400 Concurrent connections Connections established per sec. Concurrent SSL Flows (2.1.x and later) Number of SSL keys that can be stored on the sensor 80,000 2,000 NA NA Virtual Interfaces (VIDS) 32 VLANS / CIDR Blocks 64 VLANS / CIDR Blocks per Physical Port Customized attacks Alert filters Default number of supported UDP Flows Supported UDP Flows 64 40,000 32,000 6,000 60,000 6