Miele DG 4086 BRWS Operating and Installation manual - Page 39

Connection valve, medical attention.

Get Miele DG 4086 BRWS PDF manuals and user guides View all Miele DG 4086 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Connection valve Cleaning and Care If the connection valve becomes brittle, dried out or if a lot of water collects at the bottom of the steam connector niche, the valve needs to be replaced. A valve can be purchased from Miele. When lubricating the valve only use the silicone grease supplied. Never use margarine, oil, or any other grease or fat on the valve, they will cause deterioration. If the steam generator becomes difficult to insert and remove or if the fault message F20 appears, the connection valve must be lubricated. The connection valve is the upper connection in the cut out area. ^ Lubricate the connection valve, see arrow (not the plug in the lower part) with a very small amount of the supplied silicone grease, see "Accessories". Leave the valve on the connector while doing so. Take care when using silicone grease. - Remove any silicone grease from your skin by washing with soap and water. - If silicone gets into the eyes flush with plenty of clean water. - If silicone is swallowed seek medical attention. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Connection valve
If the steam generator becomes difficult
to insert and remove or if the fault
message
F20
appears, the connection
valve must be lubricated.
The connection valve is the upper
connection in the cut out area.
^
Lubricate the connection valve, see
arrow (not the plug in the lower part)
with a very small amount of the
supplied silicone grease, see
"Accessories". Leave the valve on the
connector while doing so.
Take care when using silicone
grease.
- Remove any silicone grease from
your skin by washing with soap
and water.
- If silicone gets into the eyes flush
with plenty of clean water.
- If silicone is swallowed seek
medical attention.
If the connection valve becomes brittle,
dried out or if a lot of water collects at
the bottom of the steam connector
niche, the valve needs to be replaced.
A valve can be purchased from Miele.
When lubricating the valve only use
the silicone grease supplied. Never
use margarine, oil, or any other
grease or fat on the valve, they will
cause deterioration.
Cleaning and Care
39