Miele DG 4086 BRWS Operating and Installation manual - Page 42

Possible fault, Solution, with a number.

Get Miele DG 4086 BRWS PDF manuals and user guides View all Miele DG 4086 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Frequently asked questions The oven does not change from the heating to cooking phase after relocation. Possible fault Solution The oven must be reset to a new See "Setting the altitude". location and/or boiling temperature of the water. A great deal of steam comes out of the appliance while in use, or steam comes out of unusual locations. Possible fault Solution The door is not properly closed. Close the door. The door gasket does not fit properly. Press it on, so it evenly fits. The door gasket is damaged. The gasket must be replaced. If the problem persists, call Technical Service. A whistle sounds when the cooking is resumed. Possible fault Solution Once the door is closed pressure is This is not a fault. vented with a whistling sound. The display shows a F with a number. Possible fault Solution F 20 The oven does not heat. Check if the steam generator is inserted all the way by removing it and inserting it again. Turn the steam oven off and on again. If the fault occurs again, lightly lubricate the connection valve of the steam generator with silicone grease, as described in "Cleaning and care - Connection valve". If the problem persists, turn the appliance off and call Technical Service. Other fault messages Call the Miele Technical Service Department. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
The oven does not change from the heating to cooking phase after
relocation.
Possible fault
Solution
The oven must be reset to a new
location and/or boiling temperature
of the water.
See "Setting the altitude".
A great deal of steam comes out of the appliance while in use, or steam
comes out of unusual locations.
Possible fault
Solution
The door is not properly closed.
Close the door.
The door gasket does not fit
properly.
Press it on, so it evenly fits.
The door gasket is damaged.
The gasket must be replaced.
If the problem persists, call Technical
Service.
A whistle sounds when the cooking is resumed.
Possible fault
Solution
Once the door is closed pressure is
vented with a whistling sound.
This is not a fault.
The display shows a
F
with a number.
Possible fault
Solution
F 20 The oven does not heat.
Check if the steam generator is inserted all
the way by removing it and inserting it
again.
Turn the steam oven off and on again.
If the fault occurs again, lightly lubricate the
connection valve of the steam generator
with silicone grease, as described in
"Cleaning and care - Connection valve".
If the problem persists, turn the appliance off
and call Technical Service.
Other fault messages
Call the Miele Technical Service
Department.
Frequently asked questions
42