NVIDIA VCQFX550PCIEPB User Guide - Page 86

Chapter 6 Configuring HDTV Notes on Startup Functionality with HDTV Connected nView Single Display Mode When you first start your computer, the HDTV display may have color distortion and may not fill the entire screen display. This is because when you first start your computer with a newly-installed driver, the TV signal format defaults to NTSC. nView Multi-Display Mode When two displays are connected to your computer, you will notice both displays are mirrored or "cloned" - this is nView Clone mode. As with first-time startup on a single-display setup, in a multi-display setup you will also notice that the HDTV screen will have color distortion and may not fill the entire screen display area. Again, as in a single-display setup, this is because when you first start your computer with a newly-installed driver, the TV signal format defaults to NTSC. Using HDTV in nView Display Modes Note: HDTV use is not supported in nView Span mode. Using HDTV in nView Single Display Mode Based on the connector ("Supported Television/HDTV Formats for Analog and Digital Outputs" on page 81) in use, all the associated HDTV formats ("Supported Television/HDTV Formats for Analog and Digital Outputs" on page 81) will be available in the nView Display Settings context menu available from the TV display icons as well as from the TV Settings screen. Screen resolutions and HDTV formats ("Television and HDTV Formats and Desktop Resolutions" on page 83) can be independently selected and set. 86 User's Guide