Netgear AC1900-WiFi User Manual - Page 25

Extender Network Settings

25

AC1900 WiFi Mesh Extender Essentials Edition

separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the

label of the WiFi device. If you cannot access the label, you can display the MAC address

using the network configuration utilities of the computer. You might also find the MAC

addresses on the Connected Devices page (see

View Connected Devices

on page

18).



To use WiFi access control to deny access:

1.

Launch a web browser from a computer or mobile device that is connected to your

extender network.

2.

Log in to your extender:

•

If you did not enable the One WiFi Name feature, enter

http://mywifiext.local

in the

address field of the browser.

•

If you enabled the One WiFi Name feature, enter one of the following URLs:

-

Windows-based computer

. http://mywifiext or http://mywifiext.local

-

Mac computers, iOS devices, and Linux devices

. http://mywifiext.local

-

Android devices

. http://<extender’s IP address> (for example,

http://192.168.1.3)

For information about how to find the extender’s IP address, see

Find Extender’s

IP Address

on page

43.

A login page displays.

3.

Enter your admin email address and password and click the

LOG IN

button.

The Status page displays.

4.

Select

Settings > Connected Devices

.

The Connected Devices page displays.

5.

In the WiFi Devices section, select the

Enable Access Control

check box.

The WiFi Devices table displays the names and MAC addresses of WiFi devices that are

connected to the extender.

6.

Select the

Deny

check box for the device.

7.

Click the

SAVE

button.

Your settings are saved and that device cannot connect to the extender’s WiFi network.

Section	Page
AC1900 WiFi Mesh Extender Essentials Edition	1
Contents	3
1. Get to Know Your Extender	5
Front Panel and Side Panel LEDs and Buttons	6
When to Use Your Extender	7
2. Get Started	9
Use the Extender in Extender Mode	10
Place the Extender and Apply Power	10
Connect to an Existing WiFi Network	10
Use the Extender in Access Point Mode	14
Log In to Access Extender Settings	15
Run Smart Setup	15
3. Extender Network Settings	17
View Connected Devices	18
Boost Your Video Streaming With FastLane Technology	18
View WiFi Settings	19
Change the WiFi Network Name	20
Turn Off the SSID Broadcast to Create a Hidden Network	20
Disable or Enable the WiFi Radios	21
Change the WiFi Speed	22
Use WPS to Add a Computer to the Extender’s WiFi Network	23
Use WPS With the Push Button Method	23
Use WPS With the PIN Method	24
Deny Access to a WiFi Device	24
Set Up an Access Schedule	26
Change the Extender’s Device Name	27
Set Up the Extender to Use a Static IP Address	27
Use the Extender With MAC Filtering or Access Control	28
4. Monitor and Maintain the Extender	30
Change the Extender User Name and Password	31
Turn Password Protection Off and On	32
Recover a Forgotten User Name or Password	32
Automatically Adjust for Daylight Saving Time	33
Manually Set the Extender Clock	34
Back Up and Restore the Extender Configuration	34
Back Up the Configuration Settings	35
Restore the Configuration Settings	35
Return the Extender to Its Factory Settings	36
Use the Factory Reset Button to Restore Factory Settings	37
Log In to the Extender and Reset to Factory Settings	37
Update the Firmware	38
Restart the Extender Remotely	39
5. FAQs and Troubleshooting	41
FAQs	42
Find Extender’s IP Address	43
Cannot Connect to the Extender	44
Cannot Join a WiFi Network	44
A. Supplemental Information	45
Factory Default Settings	46

Netgear AC1900-WiFi User Manual - Page 25

Settings > Connected Devices, Enable Access Control

Page 25 highlights