Netgear DM111Pv2 DM111Pv2 Setup Manual - Page 14
following see, do not run that software. Cancel it if it starts automatically.
View all Netgear DM111Pv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Improperly connecting a filter to your modem router will block your ADSL connection. b. Connect the Ethernet cable from the modem router LAN port (D) to the Ethernet adapter in your computer. D Figure 9 c. Now, turn on your computer. If software usually logs you in to your Internet connection, do not run that software. Cancel it if it starts automatically. d. Connect the power adapter to the modem router and plug it in to a power outlet. Verify the following (see Figure 10 on page 11): 1. The power light is lit after turning on the modem router. 2. The Ethernet light is on. 3. The ADSL light is green, indicating you are connected to the ADSL network. 10 Connecting the Router to the Internet
10
Connecting the Router to the Internet
b.
Connect the Ethernet cable from the modem router LAN port (
D)
to the Ethernet adapter
in your computer.
c.
Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically.
d.
Connect the power adapter to the modem router and plug it in to a power outlet. Verify the
following (see
Figure 10 on page 11
):
1. The power light is lit after turning on the modem router.
2. The Ethernet light is on.
3. The ADSL light is green, indicating you are connected to the ADSL network.
Improperly connecting a filter to your modem router will block your ADSL
connection.
Figure 9
D