Netgear EN516 EN516 Installation Guide - Page 42
BNC T-Connector and 50, Terminator
View all Netgear EN516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installation Guide for the Model EN516 Ethernet Hub BNC T-Connector and 50 Ω Terminator The BNC port on the Model EN516 hub, with the BNC T-connector and the 50 Ω terminator, is used for connecting to a thin coaxial segment. Figure C-4 illustrates the BNC T-connector and 50 Ω terminator. For information on connecting to the BNC port, refer to Chapter 3, "Installation," and Appendix B, "Cabling Specifications." 50 OHM Figure C-4. 7178 50 Ω terminator and BNC T-connector C-4 Connector Pin Assignments
Installation Guide for the Model EN516 Ethernet Hub
C-4
Connector Pin Assignments
BNC T-Connector and 50
Ω
Terminator
The BNC port on the Model EN516 hub, with the BNC T-connector and the 50
Ω
terminator, is
used for connecting to a thin coaxial segment. Figure C-4 illustrates the BNC T-connector and
50
Ω
terminator. For information on connecting to the BNC port, refer to Chapter 3, “Installation,”
and Appendix B, “Cabling Specifications.”
Figure C-4.
50
Ω
terminator and BNC T-connector
7178
50
OHM