Netgear FSM726 FSM726 User Manual - Page 102
COS-PVID, Con DiffServ
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
700 Series Managed Switch User's Guide for Software v2.1 = The VLAN ID. Adding the VLAN ID to the show vlan command displays the port that belongs to that particular VLAN. For example, show vlan 1 displays the ports that belong to VLAN 1. An example of the display output is shown below:. Untagged port members: 4,5,7,11-15,19-23 Tagged port members: none COS-PVID The show vlan cos-pvid displays the PVIDs and the CoS settings of each port. Syntax FSM726# show vlan cos-pvid An example of the display output is shown below: Port PVID Priority 1:1 1 Normal 1:2 1 Normal 1:3 1 Normal 1:4 1 Normal 1:5 1 Normal Configure Entering the command configure at the root prompt takes you into configuration mode. When you're in configuration mode, the prompt changes to FSM726(config)# It is in this mode where the vast majority of configuration is performed. To exit the configuration mode and return to root prompt, use the exit command. DiffServ DiffServ divides traffic into one of 64 classes using the packet's DSCP value. This allows for greater differentiation of traffic priority than port-based traffic prioritization. Syntax 6-12 SM-10004-02 Command Line Interface