Netgear FSM726 FSM726 User Manual - Page 65
Set-up> GBIC
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
700 Series Managed Switch User's Guide for Software v2.1 • Flow Control: Indicates whether Flow Control support is set for automatic (Auto) or off (Disabled) Set-up> GBIC This page allows the user to choose the port type for the gigabit ports. The default is 1000BASE-T (RJ-45). Figure 5-15: Setup: GBIC If you want to use a GBIC, the setting on this page must be set accordingly. The switch auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default. Note: Enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T port. Web-Based Management Interface SM-10004-02 5-15
700 Series Managed Switch User’s Guide for Software v2.1
Web-Based Management Interface
5-15
SM-10004-02
•
Flow Control:
Indicates whether Flow Control support is set for automatic
(Auto) or off
(Disabled)
Set-up> GBIC
This page allows the user to choose the port type for the gigabit ports. The default is 1000BASE-T
(RJ-45).
Figure 5-15:
Setup: GBIC
If you want to use a GBIC, the setting on this page must be set accordingly. The switch
auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default.
Note
: Enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T
port.