Netgear FSM726 FSM726 User Manual - Page 64
Set-up> Port Configuration
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
700 Series Managed Switch User's Guide for Software v2.1 Click Apply to change the IP settings Save Configuration to NVRAM and reset the system to implement the changes (Tools > Save Configuration). Set-up> Port Configuration Figure 5-14: Port Configuration This menu allows you can configure the status of each port. • Port: The port number on the switch • Name: The name of the port. This is a user-defined label. • Link: A green triangle pointing up indicates a valid link, while a red triangle pointing down indicates no link. • On/Off: Indicates if the port is enabled or disabled by the Administrator. • State: This refers to the Spanning Tree state of the port. Ports will be Blocking (Blk), Listening (Lis), Learning (Lrn), Forwarding (Fwd) or Disabled (Dis). • Speed: Indicates the speed and duplex for the port. The possible entries are Auto-negotiation (Auto); 10 Mbps half duplex (10M Half); 10 Mbps full duplex (10M Full); 100 Mbps half duplex (100M Half); or 100 Mbps full duplex (100M Full). 5-14 SM-10004-02 Web-Based Management Interface