Netgear FSM726 FSM726v2 Setup Manual - Page 119
Priority, System, Config-TFTP - fsm726s firmware
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
700 Series Software Manual v2.1 Priority Use the priority command to set the STP priority Syntax FSM726(config)# spanning-tree priority Where = is the STP priority. This number ranges from 0 - 65535. System The system command configures important system items such as IP addresses, password security, and firmware upgrade. Config-TFTP The config-tftp command is used to configure and control the mechanism to load or save the configuration file via TFTP. Syntax FSM726(config)# system config-tftp [save | load] Where [save | load] = Choose save if you wish to save your configuration file to the TFTP server, load if you wish to load the configuration file from the TFTP server. = the IP of the TFTP server where the configuration file is stored (if you are loading a configuration file from the TFTP server) or destined for (if you are saving your configuration file to the TFTP server). = The path and file name of the configuration file config-tftp ip The config-tftp ip command lets you set the IP address of the TFTP server for configuration file save/load. Syntax Command Line Interface 6-27