Netgear FSM726 FSM726v2 Setup Manual - Page 30
Main Menu> Security, Main Menu> Advanced, which include VLAN, Spanning Tree, Port Trunking - default password
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
700 Series Software Manual v2.1 Main Menu> Security This screen allows you to enable or disable the web and/or telnet interfaces, as well as change the user name and password. To use password protection, you must enable it. User names and passwords are case sensitive and can be up to 20 characters long. The factory default password is password in lower case letters. Figure 4-15: Security Note: Using telnet, you can only enable/disable the web interface. You cannot enable/disable the telnet interface. If you forget your password, contact NETGEAR technical support at 1-888-NETGEAR (in North America). Main Menu> Advanced The Advanced page allows professional users to operate more complicated features of the device, which include VLAN, Spanning Tree, Port Trunking, Multimedia support (IGMP), traffic prioritization, SNMP, and port mirroring. These features are powerful and can degrade or disable a network if improperly used. The submenus are introduced below. • Port Mirroring: You can designate a port for monitoring traffic from one or more other ports or of a single VLAN configured on the switch. The switch monitors the network activity by copying all traffic from the specified monitoring sources to the designated monitoring port, to which a network analyzer can be attached. 4-12 Administration Console Telnet Interface