Netgear FSM726 FSM726v2 Setup Manual - Page 14
Network management Station only knows the SET community string, it can read from and write - v2 manual
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
700 Series Software Manual v2.1 This management method requires the SNMP agent on the switch and the SNMP Network Management Station to use the same community string and that the SNMP Network Management Station is entered in the SNMP Host table on the switch. This management method, in fact, uses two community strings: the GET community string and the SET community string. If the SNMP Network management Station only knows the SET community string, it can read from and write to the MIBs. However, if it only knows the GET community string, it can only read MIBs. The default GET community string for the switch is 'public', and the host table is empty. Figure 2-2: SNMP-Based Management Method 2-4 Switch Management Overview
700 Series Software Manual v2.1
2-4
Switch Management Overview
This management method requires the SNMP agent on the switch and the SNMP Network
Management Station to use the same community string and that the SNMP Network Management
Station is entered in the SNMP Host table on the switch. This management method, in fact, uses
two community strings: the GET community string and the SET community string. If the SNMP
Network management Station only knows the SET community string, it can read from and write to
the MIBs. However, if it only knows the GET community string, it can only read MIBs. The
default GET community string for the switch is ‘public’, and the host table is empty.
Figure 2-2:
SNMP-Based Management Method