Netgear FVX538v1 FVX538 Reference Manual - Page 138
Pre-Shared Key, From the ID Type pull-down menu, select IP Subnet.
View all Netgear FVX538v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual b. From the ID Type pull-down menu, select IP Subnet. c. Enter the IP Subnet and Mask of the VPN firewall (this is the LAN network IP address of the gateway). d. Check the Connect using radio button and select Secure Gateway Tunnel from the pull- down menu. e. From the ID Type pull-down menu, select Domain name and enter the FQDN of the VPN firewall; in this example it is "local_id.com". f. Select Gateway IP Address from the second pull-down menu and enter the WAN IP address of the VPN firewall; in this example it is "172.21.4.1". Figure 5-27 2. From the left side of the menu, click My Identity and enter the following information: a. Click Pre-Shared Key and enter the key you configured in the FVX538 IKE menu. b. From the Select Certificate pull-down menu, select None. c. From the ID Type pull-down menu, select Domain Name and create an identifier based on the name of the IKE policy you created; for example "remote_id.com". 5-34 v1.0, March 2009 Virtual Private Networking