Netgear FWG114Pv2 FWG114Pv2 Reference Manual - Page 26
The FWG114P v2 Rear Panel, Table 2-1., LED Descriptions
View all Netgear FWG114Pv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2 Table 2-1. Label POWER TEST PRINTER ACT ALERT LED Descriptions Activity On On Off Description Power is supplied to the firewall. The system is initializing. The system is ready and running. On Blinking On (Amber) The printer is connected and powered on. Data is being transmitted or received by the Printer port. The printer has a problem, such as out of paper, out of ink, or a paper jam. MODEM ACT LINK INTERNET 100 (100 Mbps) LINK/ACT (Link/Activity) LOCAL 100 (100 Mbps) LINK/ACT (Link/Activity) WLAN Blinking Data is being transmitted or received by the Modem port. On (Amber) The port has detected a link with an attached device. Note: The operation of these LEDs depends on how the WAN port is configured. On The Internet (WAN) port is operating at 100 Mbps. Off The Internet (WAN) port is operating at 10 Mbps. On Blinking The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. On Off On Blinking On Blinking The Local port is operating at 100 Mbps. The Local port is operating at 10 Mbps. The Local port has detected a link with an attached device. The Local port is transmitting or receiving data. The Wireless (WLAN) port is operating. The Wireless (WLAN) port is transmitting or receiving data. The FWG114P v2 Rear Panel The rear panel of the FWG114P v2 Wireless Firewall/Print Server contains the port connections listed below. 2-8 Introduction 201-10301-02, May 2005