Netgear FWG114Pv2 FWG114Pv2 Reference Manual - Page 58

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2 4. Click Add to open the Wireless Card Access Setup menu. You can select a device from the list of available wireless cards the FWG114P v2 has discovered in your area, or you can manually enter the MAC address and Device Name (usually the NetBIOS name). 5. Click Add to add this device to your MAC access control list. Note: When configuring the FWG114P v2 from a wireless computer whose MAC address is not in the access control list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless firewall/print server from a wired computer or from a wireless computer which is on the access control list to make any further changes. 6. Be sure to click Apply to save your trusted wireless PCs list settings. Now, only devices on this list will be allowed to wirelessly connect to the FWG114P v2. To remove a MAC address from the table, click to select it, then click the Delete button. How to Configure WEP Note: When changing the wireless settings from a wireless computer, you will lose your wireless connection when you click Apply. You must then either configure your wireless adapter to match the new wireless settings or access the wireless firewall/print server from a wired computer to make any further changes. To configure WEP data encryption, follow these steps: 1. Log in at the default LAN address of http://192.168.0.1 with the default user name of admin and default password of password, or using whatever LAN address and password you set up. 4-10 201-10301-02, May 2005 Wireless Configuration