Netgear FWG114Pv2 FWG114Pv2 Reference Manual - Page 268
From the Traffic Selector Remote IP drop-down box, select Subnet address.
View all Netgear FWG114Pv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2 - Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP Subnet Mask field. Figure G-9: NETGEAR FWG114P v2 VPN - Auto Policy (part 2) - From the Traffic Selector Remote IP drop-down box, select Subnet address. - Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote IP Start IP Address field. - Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Remote IP Finish IP Address field. - Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote IP Subnet Mask field. - From the AH Configuration Authentication Algorithm drop-down box, select MD5. - Select Enable Encryption in the ESP Configuration Enable Encryption check box. - From the ESP Configuration Encryption Algorithm drop-down box, select 3DES. - Select Enable Authentication in the ESP Configuration Enable Authentication check box. - From the ESP Configuration Authentication Algorithm drop-down box, select MD5. - Select NETBIOS Enable in the NETBIOS Enable check box. 5. Click the Apply Button. You will be taken back to the VPN Policies Menu page. G-8 NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P v2 201-10301-02, May 2005