Netgear GS748TP-100NAS GS724TP User Manual - Page 119
Queue, Bandwidth
View all Netgear GS748TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
GS700TP Smart Switch Software Administration Manual 5. Click Apply to update the device. Queue The Queue screen contains fields for defining the QoS queue forwarding types. To set the queue settings: 1. Click QoS > CoS > Basic > Queue. The Queue screen displays: Figure 5-3 The Queue screen contains the following fields: • Strict Priority - Select to specify traffic scheduling based strictly on the queue priority. • WRR - Select to assign WRR weights to queues. The queue weights are preconfigured and are set to 1, 2, 4 and 8. 2. Select either Strict Priority or WRR to specify the traffic scheduling method. 3. Click Apply to update the device. Bandwidth After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using either: • Committed Burst Size - Indicates the maximum number of data bits transmitted within a specific time interval. • Committed Information Rate - Indicates the rate that data is transmitted. The rate is averaged over a minimum time increment. The Bandwidth screen allows the user to define Ingress Rate Limit and Egress Shaping Rates. Configuring QoS 5-5 v1.0, December 2007