Netgear GS748TP-100NAS GS724TP User Manual - Page 120
QoS > CoS > Basic > Bandwidth, Interface, Ingress Rate Limit Status
View all Netgear GS748TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
GS700TP Smart Switch Software Administration Manual To define bandwidth settings: 1. Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays: Figure 5-4 The Bandwidth screen contains the following fields: • Interface - Displays the ports for which the bandwidth settings are displayed. • Ingress Rate Limit Status - Select whether rate limiting is defined on the interface. The possible field values are: - Enable - Enable ingress rate limiting on the interface. - Disable - Disable ingress rate limiting on the interface. • Ingress Rate Limit - Enter the rate limit in kilobits per second. The possible field range is 3500 to the maximum port speed. GE ports have a maximum speed of 1000000 kilobits per second. The default value is 3500 kilobits per second. • Egress Shaping Rates Status - Select whether egress shaping is defined on the interface. The possible field values are: - Enable - Enable egress shaping rate on the interface. - Disable - Disable egress shaping rate on the interface. This is the default value. 5-6 Configuring QoS v1.0, December 2007