Netgear GS748TP-100NAS GS724TP User Manual - Page 96
Switching > STP > Advanced > CST Configuration, CST Configuration, Bridge Priority
View all Netgear GS748TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
GS700TP Smart Switch Software Administration Manual To configure CST on the device: 1. Click Switching > STP > Advanced > CST Configuration. The CST Configuration screen displays: Figure 4-22 The CST Configuration screen contains the following fields: CST Configuration • Bridge Priority - Enter the bridge priority value. When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the device with the lowest priority value becomes the Root Bridge. The default value is 32768. The bridge priority value is provided in increments of 4096. • Hello Time - Enter the device Hello Time. The Hello Time indicates the amount of time in seconds a Root Bridge waits between configuration messages. The default is 2 seconds. • Max Age - Enter the device Maximum Age Time. The Maximum Age Time is the amount of time in seconds a bridge waits before sending configuration messages. The default Maximum Age Time is 20 seconds. 4-30 v1.0, December 2007 Configuring Switching Settings