Netgear GSM7324 FSM7326P User Manual - Page 112
set garp timer leave, Default, Format
UPC - 606449029062
View all Netgear GSM7324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software set garp timer leave This command sets the GVRP leave time per port. Leave time is the time to wait after receiving an unregister request for a VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service.time is 20 to 600 (centiseconds). Note: This command has an effect only when GVRP is enabled. Default 60 centiseconds (0.6 seconds) Format set garp timer leave Mode Interface Config no set garp timer leave This command sets the GVRP leave time per port to 60 centiseconds (0.6 seconds). Note: This command has an effect only when GVRP is enabled. Format no set garp timer leave Mode Interface Config set garp timer leave all This command sets the GVRP leave time for all ports. Leave time is the time to wait after receiving an unregister request for a VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service.time is 20 to 600 (centiseconds). Note: This command has an effect only when GVRP is enabled. Default 60 centiseconds (0.6 seconds) Format set garp timer leave all Mode Global Config no set garp timer leave all This command sets the GVRP leave time for all ports to the default 60 centiseconds (0.6 seconds). Note: This command has an effect only when GVRP is enabled. Format no set garp timer leave all 8-46 202-10009-01_060204 Switching Commands