Netgear GSM7324 FSM7326P User Manual - Page 229

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Format Mode Area ID IP Address Subnet Mask Lsdb Type Advertisement show ip ospf range Privileged EXEC and User EXEC Is the area id of the requested OSPF area. Is an IP Address which represents this area range. Is a valid subnet mask for this area range. Is the type of link advertisement associated with this area range. This indicates whether the advertisement status is enabled or disabled. show ip ospf stub table This command displays the OSPF stub table. The information below will only be displayed if OSPF is initialized on the switch. Format show ip ospf stub table Mode Privileged EXEC and User EXEC Area ID Is a 32-bit identifier for the created stub area. Type of Service Metric Val Is the type of service associated with the stub metric. The 7300 Series L3 Switch only supports Normal TOS. The metric value is applied based on the TOS. It defaults to the least metric of the type of service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Metric Type Is the type of metric advertised as the default route. Import Summary LSA Controls the import of summary LSAs into stub areas. show ip ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter identifies the area and the parameter identifies the neighbor's IP Address. Format Mode show ip ospf virtual-link Privileged EXEC and User EXEC Area ID Is the area id of the requested OSPF area. Neighbor IP Address Is the neighbor IP Address that is entered. Routing Commands 202-10009-01_060204 9-47