Netgear GSM7324 FSM7326P User Manual - Page 157

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software disconnect This command closes a telnet session. Format disconnect { | all} Mode Privileged EXEC show loginsession This command displays current telnet and serial port connections to the switch. Format show loginsession Mode Privileged EXEC ID Login Session ID User Name The name the user will use to login using the serial port or Telnet. A new user may be added to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and is not case sensitive. Two users are included as the factory default, admin and guest. Connection From IP address of the telnet client machine or EIA-232 for the serial port connection. Idle Time Time this session has been idle. Session Time Total time this session has been connected. show users This command displays the configured user names and their settings. This command is only available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system. Format Mode show users Privileged EXEC User Name The name the user will use to login using the serial port, Telnet or Web. A new user may be added to the switch by entering a name in a blank entry. The user name may be up to eight characters, and is not case sensitive. Two users are included as the factory default, admin and guest Switching Commands 202-10009-01_060204 8-91