Netgear GSM7324 FSM7326P User Manual - Page 260

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Match Criteria Values Excluded The Match Criteria fields will only be displayed if they have been configured. They will be displayed in the order entered by the user. These are evaluated in accordance with the class type. The possible Match Criteria fields are: Class of Service, Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, Source Layer 4 Port, Source MAC Address, and VLAN. This field displays the values of the Match Criteria. This field indicates whether or not this Match Criteria is excluded. If the Class Name is not specified, this command displays a list of all defined DiffServ classes. The following fields are displayed: Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily the same order in which they were created.) Class Type The class type (all, any, or acl) indicating how the match criteria are evaluated for this class. A class type of all means every match criterion defined for the class is evaluated simultaneously they must all be true to indicate a class match.For a type of any each match criterion is evaluated sequentially and only one need be true to indicate a class match. Class type acl rules are evaluated in a hybrid manner, with those derived from each ACL Rule grouped and evaluated simultaneously, while each such grouping is evaluated sequentially. ACL Number The ACL number used to define the class match conditions at the time the class was created. This field is only meaningful if the class type is acl. (Note that the contents of the ACL may have changed since this class was created.) Ref Class Name The name of an existing DiffServ class whose match conditions are being referenced by the specified class definition. 10-18 CLI Commands: Differentiated Services 202-10009-01_060204