Netgear MBR1210-1BMCNS MBR1210 User Manual (ENGLISH & FRANÇAIS) - Page 48
Managing Your Network, Mobile Broadband 11n Wireless Router MBR1210 User Manual, Table 1.
View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Mobile Broadband 11n Wireless Router MBR1210 User Manual Table 1. Field Description Firmware Version This field displays the router firmware version. Mobile Broadband Modem Identity Shows the modem in use. Modem sw version The software version of the modem. Modem driver version The driver version of the modem. IMSI International Mobile Subscriber Identity. SIM card identity. IMEI International Mobile Equipment Identity. Unique identity of the modem. Operator The ISP for the broadband wireless network. Network mode The mode of the current network the modem is connected to. This is dependent on coverage and distance from the cell site. WAN Port Connection Status The status of the Internet connection. IP Address The IP address used by the modem. If no address is shown, the router cannot connect to the Internet. Protocol The protocol for the Internet connection, which is PPP (Point-to-Point). IP Subnet Mask The IP subnet mask used by the router's USB port. Gateway IP Address The IP address used by the router. Domain Name Server The DNS server IP addresses used by the router. These addresses are usually obtained dynamically from the ISP. LAN Port MAC Address The Ethernet MAC address used by the router's LAN port. IP Address The LAN port IP address. The default is 192.168.0.1. DHCP • Off. The router does not assign IP addresses to PCs on the LAN. • On. The router assigns IP addresses to PCs on the LAN. IP Subnet Mask The LAN port IP subnet mask. The default is 255.255.255.0. Wireless Port (See Manually Configure Your Wireless Settings on page 28. Name (SSID) Region Channel The service set ID, also known as the wireless network name. The country where the unit is set up for use. The current channel, which determines the operating frequency. Wireless AP Indicates if the access point feature is disabled or not. If not enabled, the Wireless LED on the front panel will be off. Broadcast Name Indicates if the router is configured to broadcast its SSID. 48 | Chapter 4. Managing Your Network