Netgear MBR1210-1BMCNS MBR1210 User Manual (ENGLISH & FRANÇAIS) - Page 92
Factory Default Settings, Appendix A., Supplemental Information
View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Mobile Broadband 11n Wireless Router MBR1210 User Manual Factory Default Settings Use the Restore Factory Settings button located on the bottom of your router to reset all settings to their original factory default settings. This is called a hard reset. To perform a hard reset, push and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory configuration settings that are shown in the following table. Feature Router login User login URL User name (case-sensitive) Login password (case-sensitive) Internet WAN MAC address Connection WAN MTU size Port speed Local network (LAN) LAN IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Time zone Daylight saving time adjustment Firewall Inbound communication from the Internet Outbound communication to the Internet) Source MAC filtering Default Behavior http://www.routerlogin.net or http://www.routerlogin.com admin password Use default address 1500 AutoSense 192.168.0.1 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled EST for North America Disabled Disabled (except traffic on port 80, the HTTP port) Enabled (all) Disabled 92 | Appendix A. Supplemental Information