Netgear MBR1210-1BMCNS MBR1210 User Manual (ENGLISH & FRANÇAIS) - Page 78
Route Name., Private, Active, Destination IP Address, IP Subnet Mask, Gateway IP Address, Metric
View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Mobile Broadband 11n Wireless Router MBR1210 User Manual 2. Select the radio button of the static route you want to configure. 3. Click Add or Edit to display the following screen: 4. Fill in or change the fields: • Route Name. The route name is for identification purposes only. • Private. Select this check box if you want to limit access to the LAN only. The static route will not be reported in RIP. • Active. Select this check box to make this route effective. • Destination IP Address, and IP Subnet Mask. If the destination is a single host, type a subnet value of 255.255.255.255. • Gateway IP Address. This must be a router on the same LAN segment as the router. • Metric. Type a number between 2 and 15. This represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 2. 5. Click Apply to save your changes. If you added a static route, it is added to the Static Routes screen. 78 | Chapter 5. Advanced