Netgear WNR2200 N300 Wireless Router with USB WNR2200 User Manual
Netgear WNR2200 - N300 Wireless Router Manual
UPC - 606449073416
View all Netgear WNR2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear WNR2200 manual content summary:
- Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 1
N300 Wireless Router with USB WNR2200 User Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA 202-10667-01 September 2010 v1.0 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 2
support service. Product updates and Web support are always available by going to: http://www.netgear.com/support. Setup documentation is available on the CD, on the support website, and on the documentation website. When the wireless router instructions. N300 Wireless Router with USB WNR2200 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 3
firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide príslušnými ustanoveními smernice 1999/5/ES. Dansk [Danish] Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan overholder de væsentlige - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 4
. Hawnhekk, NETGEAR Inc., jiddikjara NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. FCC Requirements for Operation in the United States FCC Information to User This product does not contain any user serviceable - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 5
NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the model WNR2200 N300 Wireless Router with USB WNR2200 the instructions, firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 6
and Canada. Caution: N300 Wireless Router with USB WNR2200 Tested to Comply with FCC Standards FOR HOME OR OFFICE USE Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate the equipment. Maximum Wireless Signal Rate Derived from IEEE - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 7
Product and Publication Details Model Number: Publication Date: Product Family: Product Name: Home or Business Product: Language: Publication Part Number: WNR2200 September 2010 Wireless Router N300 Wireless Router with USB WNR2200 Home English 202-10667-01 vii v1.0, September 2010 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 8
N300 Wireless Router with USB WNR2200 User Manual Contents About This Manual Conventions, Formats, and Scope xi How to Print This Manual xii Revision History ...xii Chapter 1 Configuring Your Internet Connection Using the Setup Manual 1-1 Logging In to Your Wireless Router 1-2 Selecting a - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 9
N300 Wireless Router with USB WNR2200 User Manual Chapter 3 Protecting Your Network Protecting Access to Your Wireless Router 3-1 Changing the Built-In Password 3-2 Restricting Access by MAC Address 3-2 Blocking Access to Internet Sites 3-4 Blocking Access to Internet Services 3-6 Configuring - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 10
N300 Wireless Router with USB WNR2200 User Manual Allowing Inbound Connections to Your Network 5-11 How Your Computer Accesses a Remote Computer through Your Router ...........5-11 How Port Triggering Changes the Communication Process 5-13 How Port Forwarding Changes the Communication Process 5- - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 11
N300 Wireless Router with USB WNR2200 User Manual Connecting to the USB Drive from a Remote Computer 7-12 Locating the Internet Port IP Address 7-12 Accessing the Router's USB Drive Remotely Using FTP 7-12 Connecting to the USB Drive with Microsoft Network Settings 7-12 Enabling File and Printer - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 12
USB WNR2200 User Manual About This Manual The user manual provides information for configuring the features of the NETGEAR® N300 Wireless Router with USB WNR2200 beyond initial configuration settings. Initial configuration instructions can be found in the NETGEAR Wireless Router Setup Manual. You - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 13
Version Manual Publication Date N300 Wireless Router with USB WNR2200 September 2010 For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, "Related Documents." Note: Product updates are available on the NETGEAR, Inc - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 14
N300 Wireless Router with USB WNR2200 User Manual Chapter 1 Configuring Your Internet Connection This chapter describes how to configure your WNR2200 router Internet connection. When you install your wireless router using the Resource CD as described in the NETGEAR Router Setup Manual, these - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 15
the wireless router: 1. Type http://www.routerlogin.net, or http://www.routerlogin.com, or the router's LAN IP address (default is 192.168.1.1) in the address field of your browser, and then press Enter. A login window displays: Figure 1-1 2. Enter admin for the router user name and your password - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 16
N300 Wireless Router with USB WNR2200 User Manual The Checking for Firmware Updates screen displays unless you previously cleared the Check for Updated Firmware Upon Log-in check box. Figure 1-2 If the router discovers a newer version of the software, you are asked if you want to upgrade to the new - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 17
N300 Wireless Router with USB WNR2200 User Manual 3. The Basic Settings screen displays showing the wireless router's settings. Figure 1-4 If the wireless router is connected to the Internet, you can click the Knowledge Base link or the Documentation link under Web Support to view support - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 18
N300 Wireless Router with USB WNR2200 User Manual Figure 1-5 The language is set to English by default. The default language, as language that is not already stored in flash memory, the language is downloaded from the NETGEAR server and stored in the current language partition of flash memory. • - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 19
N300 Wireless Router with USB WNR2200 User Manual The language you select is then downloaded and displayed in the language selection box, and your screen display will be in the selected language. Note: If you are not connected to the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 20
N300 Wireless Router with USB WNR2200 User Manual 3. Enter the settings for the IP address and DNS server. If you enter or change a DNS address, restart the computers on your network so that these settings take effect. 4. If no login is required, you can specify the MAC Address setting. 5. Click - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 21
N300 Wireless Router with USB WNR2200 User Manual Table 1-1. Basic Settings screen fields Settings Description Does Your ISP Require a Login? • Yes • No These fields Account Name appear only if no (If required) login is required. Domain Name (If required) Enter the account name provided - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 22
N300 Wireless Router with USB WNR2200 User Manual Table 1-1. Basic Settings screen fields (continued) Settings Internet IP Address Domain Name Server (DNS) Address This field appears only if no login is required. Router MAC Address Description • Get Dynamically from ISP. Your ISP uses DHCP to - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 23
either specify the wireless settings, or you can use WiFi Protected Setup (WPS) to automatically set the SSID and implement WPA/WPA2 security. • To manually configure the wireless settings, you must know the following: - SSID. The default SSID for the wireless router is NETGEAR. 2-1 v1.0, September - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 24
N300 Wireless Router with USB WNR2200 User Manual - The wireless radio frequency (2.4GHz or 5GHz) that each wireless adapter supports. - Wireless security option. To successfully implement wireless security, check each wireless adapter to determine which wireless security option it supports. See " - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 25
N300 Wireless Router with USB WNR2200 User Manual • Put the router in a vertical position to provide the best side-to-side coverage. Put the router in a horizontal position to provide the best up-and-down coverage. • If using multiple access points, it is better if adjacent access points use - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 26
this problem, use a computer with a wired connection to access the wireless router. To view or manually configure the wireless settings: 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin, and default password of password, or - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 27
N300 Wireless Router with USB WNR2200 User Manual 2. Select Wireless Settings from the main menu to display the Wireless Settings screen: Figure 2-2 The settings for this screen are explained in Table 2-1 on page 2-6. 3. Select the region in which the wireless router will operate. 4. For initial - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 28
Router with USB WNR2200 User Manual 6. Configure and test your computers for wireless connectivity. Program the wireless adapter of your computers to have the same SSID and wireless security settings as your wireless router. Check that they have a wireless link and are able to obtain an IP address - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 29
N300 Wireless Router with USB WNR2200 User Manual Table 2-1. Wireless Settings (continued) Settings Security Options Description • None. You can use this setting to establish wireless connectivity before implementing wireless security. NETGEAR strongly recommends that you implement wireless - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 30
settings, or access the wireless router from a wired computer to make further changes. To configure WEP data encryption: 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin, and default password of password, or using whatever - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 31
N300 Wireless Router with USB WNR2200 User Manual 2. From the main menu, select Wireless Settings to display the Wireless Settings screen. Set the You can manually or automatically program the four data encryption keys. These values must be identical on all computers and access points in your - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 32
N300 Wireless Router with USB WNR2200 User Manual - Passphrase. To use a passphrase to generate the keys, enter a passphrase, and click Generate. This automatically creates the keys. Wireless stations must use the passphrase or keys to access the wireless router. Note: Not all wireless adapters - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 33
N300 Wireless Router with USB WNR2200 User Manual To configure WPA or WPA2 in the wireless router: 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever password and LAN - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 34
N300 Wireless Router with USB WNR2200 User Manual Using Push 'N' Connect (WPS) to Configure Your Wireless Network If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure the wireless router's SSID and security settings and, at the same time, connect the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 35
the NETGEAR Smart Wizard or Atheros Jumpstart. To use the wireless router WPS button to add a WPS client: 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 36
N300 Wireless Router with USB WNR2200 User Manual The wireless router WPS screen displays a message confirming that the client was added to the wireless network. The wireless router generates an SSID, and implements WPA/WPA2 wireless security. The wireless router will keep these wireless settings - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 37
N300 Wireless Router with USB WNR2200 User Manual To use a PIN to add a WPS client: 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and password you have set - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 38
N300 Wireless Router with USB WNR2200 User Manual Configuring Advanced WPS Settings From the Advanced menu, select Advanced Wireless Settings to display the following screen: Figure 2-8 The WPS Settings area displays the wireless router PIN, and allows you to Disable Router's PIN and to Keep - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 39
N300 Wireless Router with USB WNR2200 User Manual Connecting Additional Wireless Client Devices After WPS Setup You can add more WPS clients to your wireless network, or you can add a combination of WPSenabled clients and clients without WPS. Adding More WPS Clients Note: Your wireless settings - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 40
N300 Wireless Router with USB WNR2200 User Manual 3. For the non-WPS devices that you want to connect, open the networking utility and follow the utility's instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/ PSK + WPA2/PSK security method, and passphrase). 4. For - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 41
N300 Wireless Router with USB WNR2200 User Manual Restricting Access to Your Router You can use the Advanced Wireless Settings screen to enable or disable the wireless router. From the main menu, select Advanced Wireless Settings to display the following screen: Figure 2-9 • Enable Wireless Router - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 42
N300 Wireless Router with USB WNR2200 User Manual • WPS Settings. For information about WPS settings, see "Using Push 'N' Connect (WPS) to Configure Your Wireless Network" on page 2-12. • Restricting access by MAC address. You can use a Wireless Card Access List to restrict access. See "Restricting - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 43
N300 Wireless Router with USB WNR2200 User Manual - Enable SSID Broadcast - If selected, the Wireless Access Point broadcasts its name (SSID) to all Wireless Stations. Stations with no SSID can adopt the correct SSID for connections to this Access Point. - Enable Wireless Isolation - If selected, - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 44
N300 Wireless Router with USB WNR2200 to protect your network. You can find these features by selecting the items under Content Filtering in the wireless router main menu. This chapter includes the following sections: • "Protecting Access to Your Wireless Router" • "Restricting Access by MAC Address - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 45
N300 Wireless Router with USB WNR2200 User Manual Changing the Built-In Password 1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with its default user name of admin, default password of password, or using whatever password and LAN address you have chosen for - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 46
N300 Wireless Router with USB WNR2200 User Manual 2. From the Advanced menu, select Wireless Settings, and then click Set Up Access List to display the Wireless Card Access List screen. Figure 3-1 3. Click Add to add a wireless device to the wireless access control list. The Wireless Card Access - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 47
N300 Wireless Router with USB WNR2200 User Manual • Use the Add button to enter the MAC address of the device to be added. The MAC address can usually be found on the bottom of the wireless device. Note: If no device name appears when you enter the MAC address, you can type a descriptive name for - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 48
N300 Wireless Router with USB WNR2200 User Manual 1. Select Block Sites under Content Filtering in the Schedule screen. For information about scheduling, see "Scheduling Blocking" on page 3-8. Block all access to Internet browsing during a scheduled period by entering a dot (.) as the keyword, and - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 49
IP address. 5. Click Apply to save all your settings in the Block Sites screen. Blocking Access to Internet Services The wireless router allows you to block the use of certain Internet services by computers on your network. This is called service blocking or port filtering. Services are functions - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 50
N300 Wireless Router with USB WNR2200 User Manual To block by schedule, be sure to specify a time period in the Schedule screen. For information about scheduling, see "Scheduling Blocking" on page 3-8. 3. Specify a service for blocking by clicking Add. The Block Services Setup screen displays. - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 51
N300 Wireless Router with USB WNR2200 User Manual • Enter the starting port and ending port numbers. If the application uses a single port number, enter screen displays. Figure 3-6 2. Configure the schedule for blocking keywords and services. a. Days to Block. Select days on which you want to apply - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 52
N300 Wireless Router with USB WNR2200 User Manual b. Time of Day to Block. Select a start and end " on page 3-11. 3. Click Apply to save your settings. Configuring E-mail Alert and Web Access Log Notifications To receive logs and alerts by e-mail, you must provide your e-mail account information. - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 53
N300 Wireless Router with USB WNR2200 User Manual a. Enter the name of your ISP's outgoing (SMTP) mail server (such as mail.myISP.com) in the Your Outgoing Mail Server field. You might be - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 54
N300 Wireless Router with USB WNR2200 User Manual Select Logs under Content Filtering in the main menu. The Logs screen displays. Figure 3-8 Table 3-1. Log Entry Descriptions Field Date and time Source IP Target address Action Description The date and time the log entry was recorded. The IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 55
N300 Wireless Router with USB WNR2200 User Manual • Time Zone. Select your local time zone. This setting is used for the blocking schedule and for time-stamping log entries. • Automatically Adjust for Daylight Savings Time. Select this check box if your region supports daylight savings time. When - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 56
N300 Wireless Router with USB WNR2200 User Manual Chapter 4 Using Network Monitoring Tools This chapter describes features to help you manage your N300 Wireless Router with USB WNR2200. This chapter includes the following sections: • "Upgrading the Router Firmware" • "Viewing Wireless Router Status - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 57
N300 Wireless Router with USB WNR2200 User Manual The Checking for Firmware Updates screen appears at login unless you clear the Check for Updated Firmware Upon Log-in check box. Figure 4-1 A screen is also provided for upgrading the router. From the main menu, under Maintenance, select Router - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 58
the router after upgrading. Upgrading Manually to New Router Software To manually select, download, and install new software to your router: 1. Under Maintenance on the main menu, select Router Status. Note the version number of your router firmware. 2. Go to the WNR2200 support page on the NETGEAR - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 59
N300 Wireless Router with USB WNR2200 User Manual 4. If the version on the NETGEAR website is more recent, download the file to your computer. 5. Under Maintenance on the main menu, select Router Upgrade. 6. Click Browse, and locate the firmware image that you downloaded to your PC (the file ends in - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 60
N300 Wireless Router with USB WNR2200 User Manual Viewing Wireless Router Status Information To view router status and usage information, from the main menu, under the Maintenance heading, select Router Status. The Router Status screen displays. Figure 4-4 Using Network Monitoring Tools 4-5 v1 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 61
Wireless Router Status Fields Field Description Hardware Version The router model. Firmware Version The version of the router firmware. It changes if you upgrade the router. GUI Language Version The localized language of the GUI. Internet Port MAC Address The Media Access Control address - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 62
N300 Wireless Router with USB WNR2200 User Manual Table 4-1. Wireless Router Status Fields (continued) Field Wireless Settings Wi-Fi Protected Setup Description Name (SSID): The 11N wireless network name (SSID) being used by the wireless port of the router. The default is NETGEAR. Region: The - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 63
N300 Wireless Router with USB WNR2200 User Manual The following table describes the connection status settings. Table 4-2. Connection Status Settings Item IP Address Subnet Mask Default Gateway DHCP Server DNS Server Lease Obtained Lease Expires Description The IP address that is assigned to the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 64
N300 Wireless Router with USB WNR2200 User Manual The following table describes the router statistics. Table 4-3. Router Statistics Item System Up Time Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time Poll Interval Description The time elapsed since the router was last restarted. The - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 65
N300 Wireless Router with USB WNR2200 User Manual For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address. To force the router to look for attached devices, click Refresh. Note: If the router is rebooted, the table data is lost - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 66
to a different network or if you have forgotten the password), you might want to erase the configuration and restore the factory default settings. After an erase, the router's user name is admin, the password is password, the LAN IP address is 192.168.1.1 (or www.routerlogin.net), and its DHCP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 67
N300 Wireless Router with USB WNR2200 User Manual Enabling Remote Management Access The remote management feature allows you to upgrade or check the status of your WNR2200 router via the Internet. From the main menu, under Advanced, select Remote Management. Figure 4-9 Note: Be sure to change the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 68
N300 Wireless Router with USB WNR2200 User Manual • To allow access from a range of IP addresses on the Internet, select IP Address Range. Enter a beginning and ending IP address to define the allowed range. • To allow access from a single IP address on the Internet, select Only This Computer. Enter - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 69
Traffic Meter N300 Wireless Router with USB WNR2200 User Manual Traffic Metering allows you to monitor the volume of Internet traffic passing through your router's Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a monthly limit, and get a live update of - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 70
N300 Wireless Router with USB WNR2200 User Manual restriction is applied when the traffic limit is reached. • Download only - The restriction is applied to incoming traffic only. Status button if you want a live update on Internet traffic status on your router. 9. Click Apply to save your settings - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 71
" on page 5-11 • "Configuring Port Forwarding to Local Servers" on page 5-16 • "Configuring Port Triggering" on page 5-18 • "Wireless Repeating (Also Called WDS)" on page 5-22 Using the LAN Setup Options The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 72
N300 Wireless Router with USB WNR2200 User Manual To configure LAN IP settings, log in to the router, and under the Advanced heading, select LAN Setup. The following screen displays: Figure 5-1 If you make changes you must click Apply in order for the changes to take effect. Note: If you change - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 73
N300 Wireless Router with USB WNR2200 User Manual Table 5-1. LAN Setup Settings LAN TCP/IP Setup IP Address IP Subnet Mask RIP Direction RIP Version DHCP Server For more information Use Router as a DHCP Server Starting IP Address Ending IP Address Address Reservation For more information, - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 74
N300 Wireless Router with USB WNR2200 User Manual Using the Router as a DHCP Server By default, the router functions as a DHCP server, allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to the router's LAN. The assigned default gateway address is the LAN - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 75
N300 Wireless Router with USB WNR2200 User Manual 2. In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP address from the router's LAN subnet, such as 192.168.1.x.) 3. Type the MAC address of the computer or server. Tip: If the computer is already present - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 76
N300 Wireless Router with USB WNR2200 User Manual your router automatically contacts the Dynamic DNS service provider, logs in to your account, and registers your new IP address. If your host name is hostname, for example, you can reach your router at hostname.dyndns.org. From the main menu, under - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 77
N300 Wireless Router with USB WNR2200 User Manual Configuring the WAN Setup Options The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the WAN (Internet) port. From the main - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 78
N300 Wireless Router with USB WNR2200 User Manual Table 5-2. WAN Setup Settings Setting NAT Filtering Disable SIP ALG Description Network Address Translation (NAT) determines how the router processes inbound traffic. Secured NAT provides a secured firewall to protect the computers on the LAN from - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 79
N300 Wireless Router with USB WNR2200 User Manual 3. Click Apply. Configuring Static Routes Static routes provide additional routing information to your router. Under usual circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 80
N300 Wireless Router with USB WNR2200 User Manual Select Static Routes access to the LAN only. If Private is selected, the static route is not reported in RIP. 4. Select the Active check box to make this route effective. 5. Type the destination IP address of the final destination. 6. Type the IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 81
N300 Wireless Router with USB WNR2200 User Manual 8. Type a number between 1 and 15 as the metric value. This represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1. 9. Click Apply to have the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 82
N300 Wireless Router with USB WNR2200 User Manual • The destination address is the IP address of www.example.com, which your computer finds by asking a DNS server. • The destination port number is 80, the standard port number for a Web server process. Your computer then sends this request message - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 83
N300 Wireless Router with USB WNR2200 User Manual Your router then sends this reply message to your computer, which displays the Web page from www.example.com. 6. When you finish your browser session, your router eventually senses a period of inactivity in the communications. Your router then - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 84
N300 Wireless Router with USB WNR2200 User Manual 6. Upon receiving the incoming message to destination port 33333, your router checks its session table to determine whether there is an active session for port number 33333. Finding an active session, the router restores the original address - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 85
N300 Wireless Router with USB WNR2200 User Manual • The destination address is the IP address of www.example.com, which is the address of your router. • The destination port number is 80, the standard port number for a Web server process. The remote computer then sends this request message through - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 86
WNR2200 router. See "Address Reservation" on page 5-4 for instructions on how to use reserved IP addresses. To configure port forwarding to a local server: 1. Select Port Forwarding/Port Triggering under Advanced in the main menu. Figure 5-6 2. Select the Port Forwarding radio button as the Service - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 87
N300 Wireless Router with USB WNR2200 User Manual 3. From the Service Name list, select the service or game that you will host on your network. If the service does not appear in the list, see the following section, "Adding a Custom Service." 4. In the corresponding Server IP Address box, enter the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 88
N300 Wireless Router with USB WNR2200 User Manual • If the application uses a range of ports, enter the ending port number of the range in the Ending Port field. 7. In the Server IP Address field, enter the IP address of your local computer that will provide this service. 8. Click Apply. The service - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 89
N300 Wireless Router with USB WNR2200 User Manual When port triggering is enabled, the router monitors outbound traffic looking for a specified outbound "trigger" port. When the router detects outbound traffic on that port, it remembers the IP address of the local computer that sent the data. The - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 90
N300 Wireless Router with USB WNR2200 User Manual 2. Select the Port Triggering radio button. The port triggering information displays. Figure 5-8 3. Clear the Disable Port Triggering check box. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 91
. N300 Wireless Router with USB WNR2200 User Manual Figure 5-9 6. In the Service Name field, type a descriptive service name. 7. In the Service User field, select Any (the default) to allow this service to be used by any computer on the Internet. Otherwise, select Single address, and enter the IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 92
Router with USB WNR2200 User Manual Wireless Repeating (Also Called WDS) The WNR2200 router can be used with a wireless access point (AP) to build large bridged wireless networks. Wireless repeating is a type of Wireless Distribution System (WDS). Warning: If you use the wireless repeating function - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 93
N300 Wireless Router with USB WNR2200 User Manual Wireless Repeating Function You can view or change wireless repeater settings for the wireless router. From the main menu of the browser interface, under Advanced, click Wireless Repeating Function to display the Wireless Repeating Function screen. - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 94
N300 Wireless Router with USB WNR2200 User Manual Setting Up the Base Station The wireless repeating function works only in hub and spoke mode. The units cannot be daisy chained. You must know the wireless settings for both units. You must know the MAC address of the remote unit. First, set up the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 95
N300 Wireless Router with USB WNR2200 User Manual Setting Up a Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the WNR2200 base station with a non-NETGEAR wireless router as the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 96
N300 Wireless Router with USB WNR2200 User Manual Chapter 6 Fine-Tuning Your Network This chapter describes features to help you manage your N300 Wireless Router with USB WNR2200 the Internet (upstream) than from the Internet (downstream). Keep in mind that when you connect to another site that - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 97
N300 Wireless Router with USB WNR2200 User Manual • Powerline. For connecting rooms or floors that are blocked by obstructions or are distant vertically, consider networking over your building's AC wiring. NETGEAR's Powerline HD family of products delivers up to 200 Mbps to any outlet, while the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 98
N300 Wireless Router with USB WNR2200 User Manual • Backing up computers over the network has become popular due to the availability of inexpensive mass storage. Table 6-1 shows the time to transfer 1 gigabyte (GB) - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 99
N300 Wireless Router with USB WNR2200 User Manual Next, consider the throughput of your network devices. GS605 switch to the storage server. This connection should allow for extremely fast backups or quick access to large files on the server. The PC connected through a pair of Powerline HD adapters - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 100
N300 Wireless Router with USB WNR2200 User Manual Optimizing Wireless Performance The speed and operating distance or range of your wireless connection can vary significantly based on the physical placement of the wireless router. You should choose a location for your router that will maximize the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 101
N300 Wireless Router with USB WNR2200 User Manual • Microwave ovens (no closer than 10 feet) • Choose your settings. - Use a scanning utility to determine what other wireless networks are operating nearby, and choose an unused channel. - Turn off SSID broadcast, and change the default SSID. Other - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 102
N300 Wireless Router with USB WNR2200 User Manual • You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. Note: An incorrect MTU setting can cause Internet communication problems such as the inability to access certain Web sites, frames - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 103
N300 Wireless Router with USB WNR2200 User Manual From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays: Figure 6-2 Using WMM QoS for Wireless Multimedia Applications The WNR2200 router supports Wi-Fi Multimedia Quality of Service (WMM QoS) to prioritize wireless voice - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 104
N300 Wireless Router with USB WNR2200 User Manual To specify prioritization of traffic, you must create a policy for the type of traffic and add the policy to the QoS Policy table in the QoS Setup games displays in the Applications drop-down list. Fine-Tuning Your Network 6-9 v1.0, September 2010 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 105
N300 Wireless Router with USB WNR2200 User Manual 6. From the Applications list, you Setup screen. 9. In the QoS Setup screen, select the Turn Internet Access QoS On check box. 10. Click Apply. QoS for a Router LAN Port To create a QoS policy for a device connected to one of the router's LAN ports - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 106
N300 Wireless Router with USB WNR2200 User Manual 4. From the Priority Category list, select Ethernet LAN Port. The QoS - Priority Rules screen changes: Figure 6-6 5. From the LAN port list, select the LAN port that will have a QoS policy. 6. From the Priority drop-down list, select the priority - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 107
N300 Wireless Router with USB WNR2200 User Manual 3. From the Priority Category list, select MAC Address. The QoS - Priority Rules screen changes: Figure 6-7 4. If the device to be prioritized appears in the MAC Device List, select it. The information from the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 108
N300 Wireless Router with USB WNR2200 User Manual 3. Click Apply in the QoS Setup screen to save your changes. Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, to access the network and connect to other devices as needed. UPnP devices - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 109
N300 Wireless Router with USB WNR2200 User Manual • Advertisement Period. The advertisement period is how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 110
N300 Wireless Router with USB WNR2200 User Manual Chapter 7 USB Storage This chapter describes how to access and configure a USB storage drive attached to your router. Note: The USB port on the router can be used only to connect USB storage devices like flash drives or hard drives. Do not connect - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 111
N300 Wireless Router with USB WNR2200 User Manual Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables. The router should work with most USB-compliant external flash and hard drives. For the most upto-date list of USB drives supported by the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 112
N300 Wireless Router with USB WNR2200 User Manual Computers on your local area network (LAN) can automatically access this USB drive using a Web browser or Microsoft Networking. 2. If you want to specify read only access, or to allow access from the Internet, see "Configuring USB Storage Advanced - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 113
N300 Wireless Router with USB WNR2200 User Manual • Be sure to enable either FTP (via Internet) in the USB Storage (Advanced Settings) screen. This option supports both downloading and uploading of files. See "Configuring USB Storage Advanced Settings" on page 7-7. Note: You can also enable the HTTP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 114
N300 Wireless Router with USB WNR2200 User Manual Figure 7-2 You can also type \\readyshare in the address field of your Web browser. Note: If you logged in to the router before you connected your USB device, you might not see your USB device in the router screens until you log out and then log - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 115
N300 Wireless Router with USB WNR2200 User Manual Table 7-1. USB Access or Write Access from All - no password to admin. The user name (account name) for All - no password is guest. The password for admin is the same one that is used to log in to the router main menu. By default, it is password - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 116
N300 Wireless Router with USB WNR2200 User Manual Configuring USB Storage Advanced Settings To configure advanced USB settings, under the USB heading on the router main menu, select Advanced Settings. The USB Storage (Advanced Settings) screen displays. Figure 7-4 You can use this screen to - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 117
N300 Wireless Router with USB WNR2200 User Manual Table 7-2. USB Storage Advanced Settings Fields and Buttons Description Workgroup If you are using a Windows Workgroup rather than a domain, the Workgroup name is displayed here. The name works only in an operating system that supports NetBIOS, - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 118
N300 Wireless Router with USB WNR2200 User Manual Creating a Network Access, and Write Access from All - no password to admin. The user name (account name) for All - no password is guest. The password for admin is the same one that is used to log in to the router main menu. By default, it is password - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 119
ReadyShare Access N300 Wireless Router with USB WNR2200 User Manual Once you have set up your router, you can connect any USB storage device and share the contents with other users on your network. You can access your USB device in any of the following ways: • On Windows 7, Windows XP, Windows - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 120
N300 Wireless Router with USB WNR2200 User Manual Specifying Approved USB Devices For more security, you can set up the router to share approved USB devices only. 1. Select USB Settings from device. Connect the other USB device, and then repeat this process. USB Storage v1.0, September 2010 7-11 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 121
N300 Wireless Router with USB WNR2200 User Manual Connecting to the USB Drive from a Remote Computer To connect to the USB drive from remote computers using a Web browser, you must use the router's Internet port IP address. If you are using dynamic DNS, you can type the DNS name, rather than the IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 122
N300 Wireless Router with USB WNR2200 User Manual • Microsoft Windows Start Menu, Run option • Windows Explorer • below. Note: In Windows 2000 and Windows XP, File and Printer Sharing is enabled by default. Configuring Windows 98SE and Windows ME The easiest way to get to your network properties is - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 123
User Manual Chapter 8 Troubleshooting This chapter provides information about troubleshooting your N300 Wireless Router with USB WNR2200. After each problem description, instructions are provided to help you diagnose and solve the problem. As a first step, review the Quick Tips. Tip: NETGEAR - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 124
N300 Wireless Router with USB WNR2200 User Manual Table 8-1. Quick Tips (continued) Recommendation Instructions Make sure that the Ethernet cables are securely plugged in. • The Internet status light on the wireless router is on if the Ethernet cable connecting the wireless router and the modem - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 125
. • Clear the router's configuration to factory defaults as explained in "Restoring the Default Configuration and Password" on page 8-13. If the error persists, you might have a hardware problem and should contact Technical Support at www.netgear.com/support. Troubleshooting 8-3 v1.0, September - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 126
N300 Wireless Router with USB WNR2200 User Manual Table 8-2. Troubleshooting Basic Functions Situation Recommended Action The Internet or Ethernet port lights are off. If either the Ethernet port that your computer's IP address is on the same subnet as the router. For instructions, click the - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 127
such as http://www.netgear.com. 2. Access the main menu of the router's configuration at http://www.routerlogin.net. 3. Under Maintenance, select Router Status. 4. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 128
N300 Wireless Router with USB WNR2200 User Manual • Your ISP might check for your computer's host name. Assign the computer host name of your ISP account as the account name in the Basic Settings screen. • Your ISP allows only one Ethernet MAC address to connect to Internet and might check for your - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 129
N300 Wireless Router with USB WNR2200 User Manual Testing the LAN Path to Your Router You can ping the router from your computer to verify that the LAN path to your router is set up correctly. To ping the router from a running Windows PC: 1. From the Windows toolbar, click the Start button, and then - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 130
N300 Wireless Router with USB WNR2200 User Manual Testing the Path from Your functioning correctly, replies like those shown in the previous section are displayed. If you do not receive replies: • Check that your computer has the IP address of your router listed as the default gateway. If the IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 131
N300 Wireless Router with USB WNR2200 User Manual • Date shown is January 1, 2000. Cause: The router has not yet successfully reached a Network Time Server. Check that your Internet access is configured correctly. If you have just completed configuring the router, wait at least 5 minutes, and check - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 132
N300 Wireless Router with USB WNR2200 User Manual If your wireless network appears, but the signal strength is weak, check these conditions: • Is your router too far from your computer, or too close? Place your computer near the router, but at least 6 feet away, and see whether the signal strength - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 133
N300 Wireless Router with USB WNR2200 User Manual 1. Select Wireless Settings under Setup in the main menu of the WNR2200 router. Figure 8-1 2. Make sure the Enable SSID Broadcast check box is selected. 3. For the wireless network name (SSID), use the default name, or choose a suitable descriptive - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 134
N300 Wireless Router with USB WNR2200 User Manual This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless router or access point. Select a channel that is not being used by - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 135
ways: • Use the Erase function of the router (see "Erasing the Configuration" on page 4-11). • Use the Reset button on the bottom of the router. Use this method for cases when the administration password or IP address is not known. To restore the factory default configuration settings when you do - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 136
and technical specifications for the N300 Wireless Router with USB WNR2200. Restoring the Default Factory Configuration Settings You can restore the factory default configuration settings to reset the router's user name to admin, the password to password, and the IP address to www.routerlogin.net - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 137
N300 Wireless Router with USB WNR2200 User Manual Table A-1. WNR2200 Router Default Configuration Settings (continued) Feature Default Setting Internet connection MAC Address MTU Size Use default hardware address 1500 Local network Router LAN IP address printed on product label (gateway IP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 138
N300 Wireless Router with USB WNR2200 User Manual Technical Specifications Table A-1. WNR2200 Router Specifications Feature General Network Protocol and Standards Compatibility Data and routing protocols Power Adapter North America UK, Australia Europe All regions (output) TCP/IP, RIP-1, RIP - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 139
N300 Wireless Router with USB WNR2200 User Manual Table A-1. WNR2200 Router Specifications (continued) Interface Specifications LAN WAN Wireless Radio data rates Data encoding standards Maximum computers per wireless network Operating frequency ranges 2.4 Ghz 802.11 security 10BASE-T or 100BASE- - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 140
N300 Wireless Router with USB WNR2200 User Manual Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document TCP/IP Networking Basics Wireless Networking Basics - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 141
types 6-1 crossover cable 8-4 CTS/RTS Threshold 2-19 custom service (port forwarding) 5-17 customer support ii D data packets, fragmented 6-6 date and time, troubleshooting 8-8 daylight savings time 3-12, 8-9 default DMZ server 5-8 default factory settings listed A-1 restoring 4-11, 8-13, A-1 v1 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 142
N300 Wireless Router with USB WNR2200 User Manual default gateway 4-8 deleting configuration 4-11 device name 4-10 DHCP server 4-8, 5-4 DHCP setting 4-6 Disable SIP ALG 5-8 disabling firewall 5-7 wireless client association 5-23 DMZ server 5-8 DNS addresses troubleshooting 8-6 DNS server primary - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 143
N300 Wireless Router with USB WNR2200 User Manual L LAN path, troubleshooting 8-7 LAN port QoS for 6-10 settings 4-6 LAN setup 5-1, 5-2 default LAN IP configuration 5-1 LAN IP 5-2 language, screen display 1-4 lease, DHCP 4-8 LEDs. See lights, troubleshooting and local network, default settings A-2 - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 144
renewing connection status 4-8 repeater units 5-25 requirements, speed 6-2 reserved IP adresses 5-4 restarting network 8-2 restoring configuration 4-10 default factory settings 4-11, 8-13, A-1 Restrict Wireless Access by MAC Address 2-10 RIP (Router Information Protocol) 5-3 router status, viewing - Netgear WNR2200 | N300 Wireless Router with USB WNR2200 User Manual - Page 145
7-12 user-defined services 3-7 V viewing attached devices 4-9 logs 3-10 router status 4-5 W WAN IP address, troubleshooting 8-5 WAN setup 5-7 WDS 5-23 WDS (see Wireless Repeating) 5-22 Web Configuration Interface, troubleshooting 8-4 WEP, configuring 2-8 wireless manually configuring settings
202-10667-01
September 2010
v1.0
NETGEAR
, Inc.
350 E. Plumeria Drive
San Jose, CA 95134 USA
N300 Wireless Router
with USB WNR2200 User
Manual