Netgear WNR2200 N300 Wireless Router with USB WNR2200 User Manual - Page 133

Wireless Settings, Enable SSID Broadcast, Name SSID, The default SSID is NETGEAR.

Get Netgear WNR2200 - N300 Wireless Router PDF manuals and user guides
UPC - 606449073416
View all Netgear WNR2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 133 highlights

N300 Wireless Router with USB WNR2200 User Manual 1. Select Wireless Settings under Setup in the main menu of the WNR2200 router. Figure 8-1 2. Make sure the Enable SSID Broadcast check box is selected. 3. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR. Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the SSID of any wireless access adapters must match the SSID you configure in the N300 Wireless Router with USB WNR2200. If they do not match, you will not get a wireless connection to the WNR2200 router. 4. Select the region in which the wireless interface will operate. 5. Set the channel. The default channel is Auto. Troubleshooting v1.0, September 2010 8-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
N300 Wireless Router with USB WNR2200 User Manual
Troubleshooting
8-11
v1.0, September 2010
1.
Select
Wireless Settings
under Setup in the main menu of the WNR2200 router
.
2.
Make sure the
Enable SSID Broadcast
check box is selected.
3.
For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the
Name (SSID)
field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
4.
Select the region in which the wireless interface will operate.
5.
Set the channel. The default channel is
Auto
.
Figure 8-1
Note:
The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you configure in
the N300 Wireless Router with USB WNR2200. If they do not match, you will
not get a wireless connection to the WNR2200 router.