Netgear WNR2200 N300 Wireless Router with USB WNR2200 User Manual - Page 72
Setup, Apply, Table 5-1., LAN Setup
UPC - 606449073416
View all Netgear WNR2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
N300 Wireless Router with USB WNR2200 User Manual To configure LAN IP settings, log in to the router, and under the Advanced heading, select LAN Setup. The following screen displays: Figure 5-1 If you make changes you must click Apply in order for the changes to take effect. Note: If you change the LAN IP address of the router while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again. The LAN Setup fields are explained in the following table. Table 5-1. LAN Setup Settings Device Name Description A descriptive name for the router, which will be shown in the Network on Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot be blank. Customizing Your Network Settings 5-2 v1.0, September 2010