Netgear XAV101v1 XAV101v1 User Manual - Page 29
Apply, These options only apply to QoS-con d business networks. IEEE 802.1p uses prioritization
View all Netgear XAV101v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
XAV101 Powerline AV Ethernet Adapter User Guide 2. Select the QoS (Quality of Service) tab. Figure 2-11 Note: QoS settings are applied to only the device that is selected on the QoS tab. 3. Specify the priority in the Configure Advanced QoS Settings section of the screen: 4. To set the traffic prioritization rule into the selected Powerline AV Ethernet Adapter device, click Apply. These options only apply to QoS-configured business networks. IEEE 802.1p uses prioritization bits in Layer-2 frames. Type of Service routing (ToS) uses prioritization bits in Layer-3 IP packets. The deprecated ToS values range from 0 to 7. Using the XAV101 Configuration Utility v2.0, January 2009 2-13
XAV101 Powerline AV Ethernet Adapter User Guide
Using the XAV101 Configuration Utility
2-13
v2.0, January 2009
2.
Select the
QoS
(Quality of Service) tab.
3.
Specify the priority in the Configure Advanced QoS Settings section of the screen:
4.
To set the traffic prioritization rule into the selected Powerline AV Ethernet Adapter device,
click
Apply
.
These options only apply to QoS-configured business networks. IEEE 802.1p uses prioritization
bits in Layer-2 frames. Type of Service routing (ToS) uses prioritization bits in Layer-3 IP packets.
The deprecated ToS values range from 0 to 7.
Figure 2-11
Note:
QoS settings are applied to only the device that is selected on the QoS tab.