Nikon COOLPIX L26 Reference Manual - Page 70
Using the Flash (Flash Modes), The Flash Lamp, Effective Range of the Flash
View all Nikon COOLPIX L26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Shooting Features Using the Flash (Flash Modes) You can set the flash mode. 1 Press the multi selector H (m flash mode). 2 Press the multi selector H or I to select the desired mode and press the k button. • Available Flash Modes ➝ A 51 • If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. Auto • When U (auto) is applied, D is only displayed for a few seconds, regardless of Monitor settings (A 86, E45). C The Flash Lamp The flash lamp indicates the status of the flash when you press the shutter-release button halfway. • On: The flash fires when a picture is taken. • Flashing: The flash is charging. The camera cannot take pictures. • Off: The flash will not fire when a picture is taken. If the battery is low, the monitor will turn off while the flash is charging. C Effective Range of the Flash For L26, the flash has a range of approx. 0.5 to 3.6 m (1 ft 8 in. to 11 ft) at the maximum wide-angle zoom position and a range of approx. 0.8 to 1.7 m (2 ft 8 in. to 5 ft 6 in.) at the maximum telephoto zoom position. For L25, the flash has a range of approx. 0.3 to 4.2 m (1 ft to 13 ft) at the maximum wide-angle zoom position and a range of approx. 0.6 to 1.6 m (2 ft to 5 ft 2 in.) at the maximum 50 telephoto zoom position.