Nokia IP350 Installation Guide - Page 34
Accessing Nokia Network Voyager
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 Performing the Initial Configuration rm /config/active or mv /config/active /config/active.old c. Reboot the appliance. d. Respond to the Hostname? prompt within 30 seconds to prevent the DHCP client from restarting. 3. At each subsequent prompt, type the requested configuration information and then press Enter. For more information about how to respond to the prompts during the initial configuration process, see the release notes for the Nokia software release you are running. 4. After you complete the initial configuration, you can use Voyager to configure the remaining network ports. Accessing Nokia Network Voyager You can use Voyager to configure the remaining network ports on your 60s and 100s appliances. To open Voyager 1. Start Netscape Navigator or Microsoft Internet Explorer on the host you want to use to complete the configuration. 2. In the Location or Address field, enter the IP address of the initial interface you configured on the appliance. You are prompted to enter the admin username and the password you entered when performing the initial configuration. Note If the username popup menu does not appear, you might not have a network connection between the host and your 60s and 100s 34 Nokia 60s and 100s Installation Guide