Nokia IP350 Installation Guide - Page 90
Common Ethernet Problems-Connectivity with Attached, Device, Unable to Ping Through Appliance-No
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
8 Troubleshooting Note The problem could be with the slot on the PMC card carrier. Try installing the NIC in another slot. Common Ethernet Problems-Connectivity with Attached Device Problem No link light. Solution You might have used the wrong cable. Use a crossover cable between an 60s and 100s appliance and a host, and a straight-through cable between an appliance and a hub. Problem Solid data and activity LED. Solution You might have set the wrong speed. Verify that the speeds match on each end of the Ethernet connection (10 Mbps or 100Mbps). Problem Port not enabled. Solution Verify from the Interface page in Voyager that the interface port is configured as active. Problem High collision rate on the hub. Solution Disconnect connections one at a time until the problem is localized to one computer and troubleshoot further. Unable to Ping Through Appliance-No Connectivity Between Ports This section covers connectivity issues that are isolated within an 60s and 100s appliance or network. 90 Nokia 60s and 100s Installation Guide