Nokia IP350 Installation Guide - Page 39
To remove, install, or replace a network interface card, Accessing Nokia, Network Voyager
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removing, Installing, and Replacing NICs To remove, install, or replace a network interface card Note Because power to 60s and 100s appliances is automatically disconnected when the chassis assembly is opened, you do not need to manually disconnect the power for this procedure. Any servicing of the unit, however, should be completed with the chassis assembly fully removed from the appliance. Power is still active in the chassis body and care should be taken when working on the power supply or power supply wiring without disconnecting the power cord. 1. Use Network Voyager to shut the system down. For information about how to access Voyager, see "Accessing Nokia Network Voyager" on page 34. 2. Use your fingers or a screwdriver to loosen the thumbscrews that hold the chassis assembly. Chassis assembly thumbscrews 60s 00487 Nokia 60s and 100s Installation Guide 39