Nokia IP350 Installation Guide - Page 59

Adding or Replacing DIMMs, To add or replace DIMMs

Get Nokia IP350 - Security Appliance PDF manuals and user guides View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Replacing or Upgrading Memory Caution To protect the 60s or 100s appliance and the memory modules from electrostatic discharge (ESD), make sure you are properly grounded before you touch these components. Note Because power to a 60s or 100s appliance is automatically disconnected when the chassis assembly is opened, you do not need to manually disconnect the power for this procedure. Any servicing of the unit, however, should be completed with the chassis assembly fully removed from the appliance. Power is still active in the chassis body and care should be taken when working on the power supply or power supply wiring without disconnecting the power cord. Adding or Replacing DIMMs To add or replace DIMMs 1. Use Voyager or Lynx to perform an orderly shutdown of the 60s or 100s appliance. For information about accessing Voyager, see "Accessing Nokia Network Voyager" on page 34. Nokia 60s and 100s Installation Guide 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Replacing or Upgrading Memory
Nokia 60s and 100s Installation Guide
59
Caution
To protect the 60s or 100s appliance and the memory modules from
electrostatic discharge (ESD), make sure you are properly grounded
before you touch these components.
Note
Because power to a 60s or 100s appliance is automatically disconnected
when the chassis assembly is opened, you do not need to manually
disconnect the power for this procedure. Any servicing of the unit,
however, should be completed with the chassis assembly fully removed
from the appliance. Power is still active in the chassis body and care
should be taken when working on the power supply or power supply
wiring without disconnecting the power cord.
Adding or Replacing DIMMs
To add or replace DIMMs
1.
Use Voyager or Lynx to perform an orderly shutdown of the 60s or 100s
appliance.
For information about accessing Voyager, see
“Accessing Nokia Network
Voyager”
on page 34
.