Nokia IP380 Installation Guide - Page 45
Before You Start, To remove, install, or replace a network interface card
View all Nokia IP380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing, Installing, and Replacing NICs Before You Start To remove, install, or replace a Nokia network interface card, you need the following: A Phillips-head screwdriver Physical access to the appliance Access to the appliance by using Nokia Network Voyager or the CLI Suitable, grounded work surface Field replaceable unit kit, including the NIC To remove, install, or replace a network interface card Note Because power to the IP300 Series appliance is automatically disconnected when the chassis assembly is opened, you do not need to manually disconnect the power for this procedure. Any servicing of the unit, however, should be completed with the chassis assembly fully removed from the appliance. Power is still active in the chassis body and care should be taken when working on the power supply or power supply wiring without disconnecting the power cord. 1. Use Network Voyager to shut the appliance down. For information about how to access Network Voyager, see "Accessing Nokia Network Voyager" on page 30. Nokia IP300 Series Security Platform Installation Guide 37