Nokia IP380 Installation Guide - Page 79
Configuring Software to Use Hardware Acceleration., retaining screws.
View all Nokia IP380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Installing an Encryption Accelerator Card 7. Place the screws through the standoff holes on the card and into the standoffs on the motherboard. Screw Accelerator card Standoff hole Motherboard standoff 8. Turn each screw clockwise so that the card is attached to the standoffs. Do not tighten completely. 9. Make sure that all four standoff connections are properly aligned. 10. To secure the connections, tighten the screws firmly, but do not overtighten. 11. Slide the chassis assembly back into the appliance and resecure the two retaining screws. Chassis assembly retaining screws Reseating the chassis assembly automatically restores power to the appliance. 12. Configure your software to use hardware acceleration. For more information, see "Configuring Software to Use Hardware Acceleration." Nokia IP300 Series Security Platform Installation Guide 71