Nokia IP380 Installation Guide - Page 86
Installing a Flash-Memory PC Card, Storing System Logs on the Flash-Memory PC Card
View all Nokia IP380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
7 Installing PC Cards Installing a Flash-Memory PC Card Caution You risk damage to the appliance or loss of data if you do not use the following procedure when you replace the flash-memory PC card. Note The flash-memory PC card comes formatted from the factory. To install the flash-memory PC card 1. Insert the flash-memory PC card into PC-card slot 1 or slot 2. 2. Press gently on the card until it is firmly seated in the slot. The eject button to the left of the slot should be flush with the card. Storing System Logs on the Flash-Memory PC Card You can use the flash-memory PC card to store system log messages. Use Nokia Network Voyager to configure the flash-memory PC card as an optional disk. After you reboot the Nokia IP300 Series appliance, use Network Voyager to configure system logging options. For more information, see the Nokia Network Voyager Reference Guide. You must disable the flash-memory PC card before you remove it. You can disable the flash-memory PC card by using Network Voyager or the CLI. To use Nokia Network Voyager to disable a flash-memory PC card 1. Click System Logging under System Configuration and check the Unselect check box. 2. Click Apply. 3. Click Up. 78 Nokia IP300 Series Security Platform Installation Guide