Nokia IP380 Installation Guide - Page 55
Connectors and Cables, Two-Port Ethernet NIC Front Panel Details
View all Nokia IP380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Four-Port and Two-Port 10/100 Mbps Ethernet Interface, PMC Note In the IP300 Series appliance, you cannot use two PMC four-port 10/100 Ethernet NICs in one appliance. However, you can use one PMC fourport 10/100 Ethernet NIC in combination with any other NIC that the IP300 Series appliance supports. Figure 12 shows the front panel layout of the two-port Ethernet NIC. Figure 12 Two-Port Ethernet NIC Front Panel Details Link LEDs (green) NOKIA 10/100 RJ-45 connectors 00258.1 Activity LEDs (yellow) After the power is turned on, the Ethernet link LEDs on the appliance and on the remote equipment illuminate to indicate the connection. As data is transmitted, the activity LEDs on the appliance light up. Connectors and Cables The connectors on the Ethernet NIC are RJ-45 connectors: To connect to a 10-Mbps or 100-Mbps hub, use a straight-through RJ-45 cable. To connect directly to a host, use an RJ-45 crossover cable. Use IEEE 802.3 10BASE-T, 100BASE-TX unshielded twisted-pair, fullduplex or half-duplex cable. Nokia IP300 Series Security Platform Installation Guide 47