NordicTrack E14 Instruction Manual - Page 12

Orient the Rear Console Cover 80 as shown

Get NordicTrack E14 PDF manuals and user guides View all NordicTrack E14 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

10. See step 6. Tighten the four M10 x 25mm Screws (92). Next, untie and discard the wire tie on the Main Wire (110). While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Main Wire (110), to the Pulse Wire (63), and to the Extension Wires (111, 147). Insert the excess wire into the Upright (4). Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them. 10 7 Avoid pinching the wires 110 4 101 63 111, 147 92 101 92 11. Orient the Rear Console Cover (80) as shown, and attach it to the Upright (4) with two 11 M4 x 16mm Screws (101). Then, orient the Front Console Cover (79) as shown, and attach it to the Rear Console Cover (80) with two M4 x 16mm Screws (101). 101 79 101 101 4 80 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
10
Avoid pinching
the wires
7
101
4
110
63
101
111, 147
10.
See step 6.
Tighten the four M10 x 25mm
Screws (92).
Next, untie and discard the wire tie on the Main
Wire (110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110), to the Pulse
Wire (63), and to the Extension Wires (111, 147).
Insert the excess wire into the Upright (4).
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Upright (4) with four
M4 x 16mm Screws (101);
start all the Screws,
and then tighten them.
92
92
11
11. Orient the Rear Console Cover (80) as shown,
and attach it to the Upright (4) with two
M4 x 16mm Screws (101).
Then, orient the Front Console Cover (79) as
shown, and attach it to the Rear Console Cover
(80) with two M4 x 16mm Screws (101).
79
4
80
101
101
101