NordicTrack E14 Instruction Manual - Page 13
Make sure that the Right Control Wire C is
View all NordicTrack E14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12. Orient the Accessory Tray (37) as shown, and attach it to the Upright (4) with two M4 x 16mm 12 Screws (101). 37 4 101 13. Make sure that the Right Control Wire (C) is in the location shown. Orient a Lower Tray Cover (81) as shown, and hold it near the Right Control Wire (C). Then, insert the Right Control Wire into the notches (D) in the Lower Tray Cover (see the inset drawing). Tip: Avoid pinching the Right Control Wire (C). Attach the Lower Tray Cover (81) to the right side of the Accessory Tray (37) with two M4 x 16mm Screws (101). Repeat this step on the other side of the elliptical. 13 Avoid pinching the Right Control Wire (C) 37 C D 81 D C 81 101 13
13
12
12. Orient the Accessory Tray (37) as shown, and
attach it to the Upright (4) with two M4 x 16mm
Screws (101).
4
101
37
13
101
81
37
13.
Make sure that the Right Control Wire (C) is
in the location shown.
Orient a Lower Tray Cover (81) as shown, and
hold it near the Right Control Wire (C). Then,
insert the Right Control Wire into the notches
(D) in the Lower Tray Cover (see the inset
drawing).
Tip: Avoid pinching the Right Control Wire
(C).
Attach the Lower Tray Cover (81) to the
right side of the Accessory Tray (37) with two
M4 x 16mm Screws (101).
Repeat this step on the other side of the
elliptical.
Avoid
pinching
the Right
Control
Wire (C)
C
D
C
D
81