NordicTrack E14 Instruction Manual - Page 32
Next, locate the Reed Switch 38. Turn the Pulley 19
View all NordicTrack E14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first press the power switch to the off position and unplug the power cord. Next, using a standard screwdriver, carefully pry off the left Disc (71). 71 Next, slightly loosen the indicated two M4 x 12mm Self-tapping Screws (50). Slide the Reed Switch (38) slightly closer to or away from the Magnet (43), and then retighten the Self-tapping Screws. Then, plug in the power cord, press the power switch, and rock the Pulley (19) forward and backward just enough that the Magnet (43) passes the Reed Switch (38) repeatedly. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the left disc, plug in the power cord, and press the power switch. Next, locate the Reed Switch (38). Turn the Pulley (19) until a Magnet (43) is aligned with the Reed Switch. 50 38 43 19 32