NordicTrack E14 Instruction Manual - Page 14
Tip: Avoid pinching the Right Extension Wire
View all NordicTrack E14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14. Identify the Right Upper Body Arm (61), orient it as shown, and hold it near the Right Upper Body Leg (60). See the left inset drawing. Insert the Right Extension Wire (147) into the Right Upper Body Leg (60) and route it out of the indicated hole (E). Tip: Avoid pinching the Right Extension Wire (147). Insert the Right Upper Body Arm (61) into the Right Upper Body Leg (60). Attach the Right Upper Body Arm with two M8 x 45mm Bolts (96) and two M8 Locknuts (102); make sure that the Locknuts are in the hexagonal holes (F). See the right inset drawing. Connect the Right Extension Wire (147) to the Right Control Wire (C), and insert the excess wire into the Right Upper Body Arm (61). Next, orient the Wires exactly as shown, and attach a zip tie (148) around the Right Upper Body Leg (60) in the location shown. Then, cut off the excess zip tie. Repeat this step for the Left Upper Body Arm (47). 14 47 61 147 60 Avoid pinching the wires 96 60 147 102 F 61 148 60 E C 147 15. Orient the Front Shield Cover (117) and the Center Shield Cover (75) around the Upright (4) 15 as shown. Attach them to each other with two M4 x 16mm Screws (101). Tip: Avoid pinching the wires. Press the Front Shield Cover (117) and the Center Shield Cover (75) onto the Left and Right Shields (73, 74). Avoid pinching the wires 4 117 73, 74 75 101 14