NordicTrack E14 Instruction Manual - Page 9
Repeat this step for the Left Roller Arm 45., Tip: To prevent the Main Wire 110 from, falling into
View all NordicTrack E14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Using a plastic bag to keep your fingers clean, apply some of the included grease to the right Crank Arm (20). Next, identify the Right Roller Arm (59), orient it as shown, and slide it onto the right Crank Arm (20). Attach the Right Roller Arm (59) with an M8 x 20mm Screw (95) and a Crank Cover (77). Repeat this step for the Left Roller Arm (45). 4 45 20 Grease 59 77 95 5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 Locate the wire tie (A) in the lower end of the Upright (4). Tie the wire tie to the Main Wire (110) as shown in the inset drawing. Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (110) from falling into the Upright (4), secure the Main Wire with the wire tie (A). A A 110 4 A 110 1 9