NordicTrack E14 Instruction Manual - Page 15

16. Identify the Right Leg Inner Cover (83) and insert it through the Right Upper Body Leg (60) as 16 shown. Next, identify the Right Leg Outer Cover (69) and press it onto the Right Leg Inner Cover (83) as shown. Attach the Right Leg Outer and Inner Covers (69, 83) to each other with an M4 x 16mm Screw (101). Repeat this step on the other side of the elliptical. 83 60 69 101 17. See the inset drawing. Make sure that the Right Control Wire (C) and the Right Extension Wire (147) are in the exact positions shown. Tip: Avoid pinching the wires. Orient the Right Arm Front and Rear Covers (65, 66) around the Right Upper Body Leg (60) as shown, and attach them with two M4 x 16mm Screws (101). Make sure to place the Extension Wire (147) in the indicated area (G) of the Right Rear Cover. Repeat this step on the other side of the elliptical. 17 Avoid pinching the wires 147 C 18. Attach the Tablet Holder (132) to the Console (7) with four Tablet Holder Screws (133); start all 18 the Tablet Holder Screws, and then tighten 7 them. 101 65 60 G 66 132 133 19. Make sure that all parts are properly tightened. Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 15